Origin-live Rega Threaded VTA Adjuster Manual do Utilizador descarregar pdf (Página 1)

Rega Threaded VTA Adjuster

The Threaded VTA adjuster will suit all decks. It is simply a thin threaded collar which threads onto the

Origin Live or Rega arm base. As the collar is rotated it raises and lowers the height of the arm. You need

a mounting hole of 24mm diameter or over. If your armboard is less than 11mm thick you will also need a

special packing ring. This adjuster works well on the Linn LP12. Fortunately Rega decks and many others

have this diameter already as the hole for the Rega arm is toleranced suciently oversize. The threaded

VTA adjuster initially raises the height of the rega arm by 2mm due to the top ange thickness - it can

then raise the arm further by approx 10mm depending on the thickness of your armboard.

Installing on your Armboard

The order and position of the components required for the threaded VTA adjuster are as follows:

Installing on your Linn Armboard

The VTA Adjuster can be installed on your Linn LP12 armboard without the need for a packing ring:

We wish you many hours of enjoying your increased listening pleasure

Further tonearm upgrades and accessories are available at www.originlive.com

Origin Live, Unit 5, 362b Spring Road, Sholing, Southampton, SO19 2PB

www.originlive.com originlive@originlive.com

VTA Adjuster

Packing Ring

M23 Nut

Origin Live

Armboard for Technics

VTA Adjuster

M23 Nut

Linn LP12

Armboard

Rega Threaded VTA Adjuster The Threaded VTA adjuster will suit all decks. It is simply a thin threaded collar which threads onto the Origin Live or R

Sem comentários

Origin-live Rega Threaded VTA Adjuster Manual do Utilizador Página 1